HP Proliant DL380 G3, HP diagnostic/configuration tools
Well.. I was surfing around trying to figure out an easy way to configure and diagnose the SCSI Smart Array 5i Plus that came with my server. It turns out HP does include some software for Debian which might be useful for us. For the sake of making these files public so that more people (who are much better at this than myself) can use and try these files out, here is a list of what I have found. Please if you find any use of these files, post up some information for others.
Installation Information for Debian Etch 4.0 (i386)
https://h20392.www2.hp.com/portal/sw...umber=T8570AAE
Installation Information for Debian Etch 4.0 (AMD64/EM64T)
http://h20392.www2.hp.com/portal/swd...umber=T8569AAE
On the bottom of that page, you can 'receive for free' the following files:
Additional product information
Product #: T8570AAE
Version: Debian 4.0 (Etch)
Software specification: hpasm-7.8.0-100.etch26.i386.deb
hp-OpenIPMI-7.8.0-108.etch26.i386.deb
hprsm-7.8.0-103.etch26.i386.deb
cmanic_7.9.0-5b.etch_i386.deb
hpsmh-2.1.7-167.debian.i386.deb
cpqacuxe-7.80-4.linux.deb
hpacucli-7.80-3.linux.deb
hpadu-7.80-4.linux.deb
Additional product information
Product #: T8569AAE
Version: Debian 4.0 (Etch)
Software specification: hpasm-7.8.0-91.etch26.amd64.deb
hp-OpenIPMI-7.8.0-108.etch26.amd64.deb
hprsm-7.8.0-104.etch26.amd64.deb
cmanic_7.9.0-5b.etch_amd64.deb
hpsmh-2.1.7-167.debian.amd64.deb
cpqacuxe-7.80-4.linux.deb
hpacucli-7.80-3.linux.deb
hpadu-7.80-4.linux.deb
Fill out the information and download the files.
You may also need this:
http://packages.ubuntu.com/gutsy/i38...bc2.2/download
Good luck. I am going to try to install these on my server, per HP's instructions and see what happens.
Reference: http://www.zabbix.com/forum/showthread.php?p=35469
http://ubuntuforums.org/showthread.p...ht=hp-OpenIPMI
2 Weeks Ago at 11:09 PM.. Reason: Adding AMD64/EM64T
Re: HP Proliant DL380 G3, HP diagnostic/configuration tools
I ran into the same problem with a DL380 G4 and found that the "Lenny" (5.0) distributables provided on ISO work great with Ubuntu 8.10
i've installed the amd64T version of the HP tools and the only package I needed for the tools wat "libc6-i386".
hope this helps
good luck
Topic